Specs and Techs: 320T Access Point / Boundary Box
Description:
The axs 320T is a purpose designed mini access box, or boundary box, that will cater for low fibre count connections. The axs 320T is normally used to connect MDU’s or single use Clients from the network.
Features and Benefits:
- Access Chambers are available with RAMAC™ Smart Monitoring Technology options
- Ideal for low density traffic installations. Depending on splitter configuration, up to 12 clients can be connected.
- The unit can be split between base or pan and chamber section to allow installation over existing networks.
- Low footprint unit 250mm x 230mm.
- No tools required for assembly – press-on clips complete the assembly.
- Duct ports are sealed with rubber grommets allowing interface with MultiDuct and/or MicroDuct. No foaming agent or additional sealants are required.
- Knock-down design allows high packing density for transport savings.
- Hingeless slide-in lid with nylon lanyard.
Installation Instructions:
As with all plastic structures, installation and backfilling of these manholes/draw-boxes both form an integral part of the structure. Bad/inadequate installation practice may lead to failure.
1. Bedding
A stone free bedding (underlayer) of minimum 50mm is required. Quarry sand is suggested.
2. Backfilling
Backfilling (reinstatement) to paving level should be competed with stone free (-6mm) material. This should be layered 50 – 75mm
at a time, and tamped to required compaction. Stabilisation of the backfill material with the addition of 5% cement is recommended, ensuring stability of the construction/assembly.
3. Compaction
These are small units, and mechanical tamping is not recommended.
| Material | |
| 1. Lid, box and base | PP, UV stabilised |
| 2. Lock | Nylon Swivel Lock or Bolt Down Lock |
| 3. O Ring | 6mm NBR |
| 4. Chamber | PP, UV stabilised (Black) |
| 5. Base | PP, UV stabilised (Black) |
| 6. Clip | Nylon |
| 7. End cap | PVC |
| Dimensions | As per drawings on request |
| Branding | As per clients specification |
| Loading | 700Kg Downward Point load with 150mm footprint |
